Evaluation of Polyphenols in Wine by Voltammetric Techniques with Screen Printed Carbon Electrodes

The electrochemical oxidation processes that occur during a voltammetric assay in wine samples lead to the formation of species that obstructs the surface and reduce their active area. This effect is critical for screen printed carbon electrodes (SPCE) and leads to abnormal low values of the total polyphenols content of wines, ca. 72 % lower than those obtained with glassy carbon electrodes. This effect was examined using 10 red and Port wine samples. Mechanical polishing and electrochemical‐based treatments for the removal of this fouling layer were tested. The best results were obtained by electrochemical activation in at a constant potential of 1.2 V during 100 s Na₂CO₃ saturated solution, and by polishing. The success of some of these treatments brings an added value to SPCE, as it opens the possibility of their reuse in the wine analysis. This outcome is particularly relevant for quality control where a huge number of analysis is performed and the reduction of cost may dictates the choice of the analytical method.     

Influence of oxygen on soot formation during acetylene pyrolysis

Kinetic modeling of pyrolysis of acetylene diluted with argon showed a strong influence of small additives of oxygen on the routes of formation of soot nuclei. The influence of oxygen on various channels of formation and consumption of propargyl radicals C₃H₃, which are important precursors of soot formation, as well as the fundamental possibility of controlling the process of soot formation and its properties are considered.     

Photocatalytically Renewable Micro‐electrochemical Sensor for Real‐Time Monitoring of Cells

Electrode fouling and passivation is a substantial and inevitable limitation in electrochemical biosensing, and it is a great challenge to efficiently remove the contaminant without changing the surface structure and electrochemical performance. Herein, we propose a versatile and efficient strategy based on photocatalytic cleaning to construct renewable electrochemical sensors for cell analysis. This kind of sensor was fabricated by controllable assembly of reduced graphene oxide (RGO) and TiO₂ to form a sandwiching RGO@TiO₂ structure, followed by deposition of Au nanoparticles (NPs) onto the RGO shell. The Au NPs‐RGO composite shell provides high electrochemical performance. Meanwhile, the encapsulated TiO₂ ensures an excellent photocatalytic cleaning property. Application of this renewable microsensor for detection of nitric oxide (NO) release from cells demonstrates the great potential of this strategy in electrode regeneration and biosensing.     

洗涤用品质量安全检测技术研究进展

洗涤用品是日常使用的产品,其质量安全受到广大消费者的关注。洗涤用品中可能存在的化学风险物质,将对消费者的健康安全产生负面影响。为了减少和避免洗涤用品质量安全问题,研究人员采用多种分析测试技术,开发、建立了洗涤用品中化学风险物质的检测方法。该文综述了近年来洗涤用品质量安全检测技术的研究进展,以期为相关领域的科技人员提供理论支持和技术参考。     

Vapor deposition of ultrathin hydrophilic polymer coatings enabling candle soot composite for highly sensitive humidity sensors

Candle soot (CS) is a desirable carbon nanomaterial for sensors owing to its highly porous nanostructure and large specific surface area. CS is advantageous in its low-cost and facile preparation compared to graphene and carbon nanotubes, but its pristine nanostructure is susceptible to collapse, hampering its application in electronic devices. This article reports conformal coating of nanoscale crosslinked hydrophilic polymer on CS film using initiated chemical vapor deposition, which well preserved the CS nanostructure and obtained nanoporous CS@polymer composites. Tuning coating thickness enabled composites with different morphologies and specific surface areas. Surprisingly, the humidity sensor made from composite with the lowest filling degree, thus largest specific surface area, showed relatively low sensitivity, which is likely due to its discontinuous structure, thus insufficient conductive channels. Composite sensor with optimum filling degree shows excellent sensing response of more than 10³ with the linearity of R² = 0.9400 within a broad relative humidity range from 11% to 96%. The composite sensor also exhibits outstanding sensing performance compared to literature with low hysteresis (3.00%), a satisfactory response time (28.69 s), and a fast recovery time (0.19 s). The composite sensor is fairly stable and durable even after 24 h soaking in water. Furthermore, embedding a humidity sensor into a face mask realizes real-time monitoring of human breath and cough, suggesting promising applications in respiratory monitoring.     

Preparation of superhydrophobic composite paper mulching film

To study the influence of different concentrations of zinc oxide (ZnO)/silicon dioxide (SiO₂) composite coating on hydrophobic property and mechanical stability of paper mulch film, three kinds of ZnO/SiO₂ composite coating paper mulch films (2%, 4%, 6%) with different coating substance contents were prepared by brush coating method. Through particle size analysis, contact angle, rolling angle and mechanical stability test, combined with scanning electron microscope, three-dimensional morphology and roughness measuring instrument, the optimal concentration of ZnO/SiO₂ composite coated paper mulch film was screened out. Through acid-base salt corrosion test, silver mirror reaction and surface self-cleaning, the optimal concentration of composite coated paper mulch film was compared with the original paper mulch film to prove its excellent chemical stability and hydrophobicity. The results show that the paper mulch film with 4% coating material has excellent hydrophobicity and mechanical stability, can effectively reduce the surface roughness of paper mulch film, and has remarkable effects in resisting acid, alkali and salt and self-cleaning.     

Experimental investigation on tunnel sonic boom

Upon the entrance of a high-speed train into a relatively long train tunnel, compression waves are generated in front of the train. These compression waves subsequently coalesce into a weak shock wave so that a unpleasant sonic boom is emitted from the tunnel exit. In order to investigate the generation of the weak shock wave in train tunnels and the emission of the resulting sonic boom from the train tunnel exit and to search for methods for the reduction of these sonic booms, a 1300 scaled train tunnel simulator was constructed and simulation experiments were carried out using this facility.In the train tunnel simulator, an 18 mm dia. and 200 mm long plastic piston moves along a 40 mm dia. and 25 m long test section with speed ranging from 60 to 100 m/s. The tunnel simulator was tilted 8° to the floor so that the attenuation of the piston speed was not more than 10 % of its entrance speed. Pressure measurements along the tunnel simulator and holographic interferometric optical flow visualization of weak shock waves in the tunnel simulator clearly showed that compression waves, with propagation, coalesced into a weak shock wave. Although, for reduction of the sonic boom in prototype train tunnels, the installation of a hood at the entrance of the tunnels was known to be useful for their suppression, this effect was confirmed in the present experiment and found to be effective particularly for low piston speeds. The installation of a partially perforated wall at the exit of the tunnel simulator was found to smear pressure gradients at the shock. This effect is significant for higher piston speeds. Throughout the series of train tunnel simulator experiments, the combination of both the entrance hood and the perforated wall significantly reduces shock overpressures for piston speeds ofu _p ranging from 60 to 100 m/s. These experimental findings were then applied to a real train tunnel and good agreement was obtained between the tunnel simulator result and the real tunnel measurements.     

井下多股淹没射流水力清岩能力分析

研究石油钻井井下射流的水力清岩能力对钻井业有重要意义。本文借助于预处理方法和多块网格对接技术由计算机数值模拟了形状复杂的钻井PDC钻头井底下的多股淹没射流流场。为体现井底有岩屑时射流场对其的清洗作用。文中借助河流泥沙运动理论，分析了岩屑在井下的受力与运动以考虑固相的作用。因岩屑主要为推移运动。在井底除环空外的大部分地方可简化视为二维运动。提出了钻头井底水力清岩能力的体现参数-水力挟岩力。并通过数值模拟显示了井下流场，描述了转速，射流流量，喷嘴面积，射流雷诺数及井下过流空间等流场控制参数对井底水力清岩能力的不同影响，指出相关水力参数在射流时的优化方向。为复杂的井底流场控制和钻头的合理设计做探索基础。     

钛材化学清洗工艺综述

介绍了钛材碱洗脱脂除油和酸洗除去氧化皮的原理和方法,重点阐述了钛材碱洗除油和酸洗除去氧化皮的工艺条件、工艺流程和设备.